High-Strength Aluminum Solar Ground Mount Pile System for Utility-Scale Projects

FAQs

• Q1: Fuyuansheng is a pile foundation installation system, Is it necessary of concrete foundation or anchor rods?

  A1: No. Employing C-shaped steel pile sinking as the foundation, this system is free from the use of anchor rods or concrete foundations, and from any other kind of underground work. The pile driver pound the pile into the ground to the required depth, therefore the amount of civil work especially for vast project locations with undulated land can be dramatically reduced.

• Q2: How long it takes to make a single pile foundation?

  A2: The pile sinking can be done within 3 minutes for a single pile foundation by the pile driver. However, on-site assembly for megawatt-level large power station projects may be greatly condensed due to this high construction speed, leading to significant saving on labor and time cost.

• Q3: To which installation sites does this system apply?

  A3: This system is expressly designed for ground mount solar module installation and is suitable for Open Field (open field) for large-scale commercial and utility-scale power station projects. The single-column design performs well on uneven surfaces with an angle inclining from 10 to 35 degrees under both framed and frameless PV modules.

• Q4: What are the main material(s) used in the system?

  A4: The system mainly uses AL6005-T5 High-strength aluminium alloy ( with anodized treatment), the fasteners are made of SUS304 high quality stainless steel and the pile material is hot-dip galvanized Q235 steel. These three together guarantee the system's lifecycle long term structural strength and resistant.

• Q5: How is part of the system’s performance in wind load and snow load?

  A5: The wind pressure resistance of the system can reach a maximum of 60m/s, the snow load of the system can reach a maximum of 1.5kN/m²(product specification:-2.06KN/M² and 2.38kN/m², climate condition ; -1.4 KN/M² and 1.5kN/m², the Highest value from the D.S.T has to be taken into consideration). It can meet outdoor installation requirements in the all kinds of bad weathers.

• Q6: How long is the product’s warranty, and the design life?

  A6: System offers a 12-year warranty (the table also mentions 10 years and 12 years, the maximum value for the detailed specification table id 12 years), and the design life is more than 25 years. The long-term outdoor use of material selection and process control is advanced.

• Q7: What kind of certifications does the product have?

  A7: The product meets the international AS/NZS 1170 structural design standards, and obtained multiple third party authoritative certifications, such as ISO9001 quality management system certification, SGS and TUV, which guarantee that the quality of design and production could meet the requirement of international engineering.

• Q8: This system is pre-assembled in the factory?

  A8: Yes The system is mostly pre-assembled at the factory with only a few components to be installed on site . This significantly reduces the installation on site complexity and labor, and shortens the construction period. It is a core strength of the product.

• Q9: Is there any control on packaging and delivery?

  A9: The product uses a packaging method of carton + wood pallet / iron pallet to protect the components well during shipping. The factory is only 45 kilometers from the port, and the high logistics efficiency, the export transportation cost more advantageous.

• Q10: Are customized requirements supported in Fuyuansheng?

  A10: Yes. Fuyuansheng specializes in high quality custom welding components and solar array support systems. Standard or expedited custom order: the company always put the customer in the foremost and strives to offer the optimal balance solution under quality, delivery and cost.